Machsupport Forum
Third party software and hardware support forums. => Galil => Topic started by: Haik on July 24, 2010, 04:49:10 PM
-
Hello,
I just bought a Galil DMC-2030 and am trying to get Windows (both XP and 7) and Mach3 to recognize it. At present Windows Device Manager shows (see attached pic):
under "Universal Serial Bus Contollers"...
-- "Generic USB Hub"
under "Other Devices"...
-- ("!") "NET2888 USB Interface Controller"
I've installed the v7 drivers (I think) by running dmcdriverdll02.exe and dmcsmartterm02.exe and also Galil.m3p but the result in Mach3 is "Galil Card not connected!!"
I've also toggled the USB switch on the unit, but still no luck. Any help is much appreciated!