Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Ainis on July 13, 2010, 03:56:05 PM

Title: keygraber problem
Post by: Ainis on July 13, 2010, 03:56:05 PM

Hi to everyone. I'am making control panel for my cnc mill, and I made Mjoy joystick controller to interface control panel buttons. In game controllers I can see that Mjoy controller is fully working. I can calibrate it and etc, but keygraber don't find it. Maybe someone had same problem?
Ainis.