Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Picengraver on June 11, 2010, 12:55:10 PM
-
My router (a popular model) is made from MDF and the XY is not easy to square up, so I use a formula [y=y-(x*.007)] in my setup, and this works well for me (I know it should be squared up mechanically, but for now it is what it is).
However, with the formula active, if I use the "Go to Zero" button on the main screen, the X axis always returns to a negative value, but the X DRO resets to zero (the Y axis is OK). I can work around this with a new button, but is another solution possible?
Regards,
John Champlain
-
Sorry, it is the Y axis that changes - not X.
Regards,
John Champlain