Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: woodguy7777 on June 09, 2010, 09:04:55 AM

Title: Edit g code help
Post by: woodguy7777 on June 09, 2010, 09:04:55 AM

i am trying to edit a g code file   but when i click on edit g code,  the edit box that i have seen on the tutorial video
does not show up.
 G-code edit selection button does not  launch the standard Windows Notepad program .
thanks paul

Title: Re: Edit g code help
Post by: Tweakie.CNC on June 09, 2010, 09:29:25 AM

Hi Paul,

Don't know if this helps but under Config / General Config is Notepad specified as the G Code editor ?. (top center of window).

Tweakie.

Title: Re: Edit g code help
Post by: woodguy7777 on June 09, 2010, 01:41:20 PM

yes Tweakie it has Notepad specified as the G Code editor .
paul

Title: Re: Edit g code help
Post by: RICH on June 09, 2010, 02:04:47 PM

I have never had that problem.
What version of Mach are you using?
Are you using the standard screen?

RICH

Title: Re: Edit g code help
Post by: woodguy7777 on June 09, 2010, 05:35:31 PM

thanks for the help  is was not a mach3 problem  but a computer problem.
tried another computer and it work
thanks for the time
paul