Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: khalid on June 04, 2010, 10:02:50 AM
-
I am having a strange problem today.. My Keyboard Arrow Keys failed to Jog the Motors...even the 'Page Up' and Page Down' keys didn't moved my Z-axis motor...I have done following more test:
a) I checked the System Hotkeys Setting in Mach3 and they were defined correctly for all Axes.
b) I open a Notepad and wrote some paragraph and Scrolled each Alphabets with Keyboard Arrow keys and they worked perfectly.
c) I have made a quick test to see if all axis are working is to issue some G0 commands on the MDI page of Mach3. I typed G00 X2 Y4 Z6 and entered and all motors moved to its locations.
From a decade i am using the same Keyboard and the Arrow keys working perfectly in other applications but why it failed today?..Any idea or suggestions?
-
Jog control off?
Hood
-
Hi Hood.. I will definitly look it.. May be i pressed some wrong key during cleaning of my Keyboard when Mach3 was On... Any Hot key that makes the Jog control Off?
-
Oops.. where i enable the Jog Control?...
Is it the same in Config-->General Configuration--->Persistent Jog Mode???
-
on main page of standard screenset, button says Jog On/Off ctrl-alt-J
Hood
-
Hi Hood:)
After 7-years i learnt some new...and You saved my day... May God keep you and your family Healthy and wealthy..Thanks for your help:)
Regards
-
no probs :)
Hood