Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dlc on May 21, 2010, 09:11:06 AM

Title: Threading test with demo version
Post by: dlc on May 21, 2010, 09:11:06 AM

When first attempting to thread G76 returned:
   no spindle feedback seen in (G95) units/rev mode

Diagnostics indicated the proper rpm and no indication of a missed pulse.  The locked rpm, error and variation are 1.#inf

After restarting MachTurn the same gcode sequence hangs on G76 without any motion or feedback.

Title: Re: Threading test with demo version
Post by: Hood on May 21, 2010, 09:26:28 AM

Threading does not work in demo version.
Hood