Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: lucky021 on May 10, 2010, 03:39:10 PM

Title: my motor speed - RPM is changing, why?
Post by: lucky021 on May 10, 2010, 03:39:10 PM

Hello, I met a problem here

when I use button jog mode with 100% jog rate, the motors are running much faster than I input "G1 X20 Y20 Z20", why and where I can setup it?

thanks for any help

Title: Re: my motor speed - RPM is changing, why?
Post by: Cncman2nv on May 10, 2010, 03:44:24 PM

When U use G1 that means linear interpolation @ last feed or current feed rate the jog feed doesn't effect the Gcode feeds