Machsupport Forum

Mach Discussion => Brains Development => Topic started by: Landon on May 06, 2010, 03:57:18 PM

Title: solenoids for controlling the spindle speed
Post by: Landon on May 06, 2010, 03:57:18 PM

I have a Bridgeport R2E3 with solenoids for controlling the spindle speed in the gearhead as well as spindle brake. I have installed an Ajax system into the machine. What outputs in mach 3 would I use to get them to shake hands?

Title: Re: solenoids for controlling the spindle speed
Post by: Landon on May 11, 2010, 01:41:03 PM

This problem has been solved