Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: lucky021 on May 03, 2010, 04:52:58 PM
-
My computer has no parallel port on motherboard, so I bought a PCI parallel port board, and I set it as LPT2 in PC. While in Mach3, I clicked the port#1 and input the related LPT2 address. It works, anyway.
Does it really matter if I set PCI as LPT1 or LPT3 or LPTx as long as I set port#1 with correct address?
I tested with setting as LPT1 in PC, it works too. why?
Thanks.
-
As you have found the Port in Mach has no relation to the LPT number that windows calls it, Mach just looks at the address you enter.
Hood
-
So how do you find out the port address of your Port ??
-
So how do you find out the port address of your Port ??
Look at the resources of the port in Device Manager.
Hood