Machsupport Forum

Support => Downloads => Others => Topic started by: Sam on May 01, 2010, 08:40:37 PM

Title: Circle holes constants chart
Post by: Sam on May 01, 2010, 08:40:37 PM
Here's a handy dandy chart that gives evenly spaced hole locations around a circle. It's came in handy several times on the shop floor, especially when you don't have time to sketch something out on the computer, or don't have access to one. The PDF file is clear and can give a good print resolution, unlike the small photo.
Title: Re: Circle holes constants chart
Post by: Overloaded on May 01, 2010, 11:00:25 PM
Very handy indeed Sam.......thanks !
Russ