Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: lucky021 on April 30, 2010, 03:52:39 PM

Title: beginner, driver test , pulsing too fast
Post by: lucky021 on April 30, 2010, 03:52:39 PM

Hi, my first time to connect computer to cnc machine, do the driver test firstly, it said "pulsing too fast", is there anything wrong? thanks.

Title: Re: beginner, driver test , pulsing too fast
Post by: Hood on April 30, 2010, 05:03:38 PM

Did you have Mach open?
Hood