Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: riporeno on April 05, 2010, 04:00:35 AM

Title: to turn on the aspirator to regular intervals
Post by: riporeno on April 05, 2010, 04:00:35 AM
hi   
I would like to insert in the g code the command that turns on the aspirator (m8) every 10 minutes for a duration of 5 minutes. 
This cycle is had to repeat for the whole program. 
How can I do? 
Thanks 
regards 
Moreno