Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: uirobot on April 01, 2010, 10:23:05 PM

Title: Size Coin only 1.665*1.665*0.53 inch Stepper Motor Controller with RS232 or CAN.
Post by: uirobot on April 01, 2010, 10:23:05 PM

Hey
This is Tiger Huang from Shanghai, Product Manager of Stepper Motor Controller. Our Product Engineer Doctor Zhu who study and work in the USA developed a size coin, which is only 1.665*1.665*0.53 inch Stepper Motor Controllers with Microstepping, RS232 or CAN (protocol).
Welcome communicate with us tiger@uirobot.com Thanks!


(http://www.uirobot.com/userfiles/242_02.jpg)