Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: morarudnl on March 28, 2010, 09:21:20 AM

Title: Error triggered Art code: 1
Post by: morarudnl on March 28, 2010, 09:21:20 AM

Hi all,

I have this problem with mach3.
Can anyone help?
Tanks a lot.

 

Title: Re: Error triggered Art code: 1
Post by: Hood on March 28, 2010, 11:19:09 AM

Has this just started or is it a new install?
How do you get that, is it just as you try to start Mach?
What version are you running and is it licenced or just a demo?
Have you tried re downloading from Machs downloads page and reinstalling?
Hood

Title: Re: Error triggered Art code: 1
Post by: morarudnl on March 28, 2010, 02:15:33 PM

Hi Hood,

I work with this installation about 2-3 years, without any problems.
Some day when I started Mach3  appears this message.
I have buy Mach3 lic. ( for SCULE ARAD)
This messages appears with old installation, and wen I reinstall with new version, this messages appears again.
I remove Mach3 from my computer, and I reinstall with last version  but this message appears again.  

Tank you very much Hood, and all,  for any suggestions.

Daniel.

Title: Re: Error triggered Art code: 1
Post by: Hood on March 28, 2010, 05:18:12 PM

I will see if Art can have a look as he is probably the only one that will know what the Artcode means.
Hood

Title: Re: Error triggered Art code: 1
Post by: ART on March 28, 2010, 05:50:20 PM

Hi:

 Does it happen with Mach3Turn? Or how about trying a new blank profile?

Art

Title: Re: Error triggered Art code: 1
Post by: morarudnl on March 29, 2010, 02:15:35 AM

Hi Art,

It happen with mill Mach3.

 Mach3Turn works, and Mach3Plasma works only x and z axis, y don't work .

Only Mach3Mill and new mill profile appears this message.

Tanks Moraru Daniel.

Title: Re: Error triggered Art code: 1
Post by: ART on March 29, 2010, 09:56:51 AM

Hi:

  Hmm, zip the xml profile and post it here and Ill see if I can find the problem, must be a setting somewhere..

Art

Title: Re: Error triggered Art code: 1
Post by: morarudnl on March 29, 2010, 05:05:03 PM

Hi Art,

This is all files .xml from my Mach3 profile.

Tanks,

Daniel.

Title: Re: Error triggered Art code: 1
Post by: ART on March 29, 2010, 06:48:41 PM

Hi:

  Im afraid it works fine here.. Mach3mill.xml does anyway.

I notice you have a file with no name ".xml" , delete that file and any xml's you dont use and see if that helps..

Art

Title: Re: Error triggered Art code: 1
Post by: morarudnl on April 02, 2010, 11:29:03 AM

Hi Art,

I solve problem, I remove all mach3 components from my computer and I reinstall mach3.
Until now mach3 run OK.
But I don't know why the message appeared.

Tanks for advices.

Moraru Daniel.
 

Title: Re: Error triggered Art code: 1
Post by: Ya-Nvr-No on April 22, 2010, 10:33:32 PM

I was having this same issue. Tried creating a new profile but got the same error.
Not real sure where it hung up, I got the splash screen and then the error. Art Code:1
So I started removing unneeded things.
tracked it down to a plugin issue, the ShuttlePro.dll I move it out and no more error.
I put everything else back to where they were.
So have to assume an Art Code:1 is for a plugin load error or some kind of conflict with another plugin.

Title: Re: Error triggered Art code: 1
Post by: morarudnl on April 23, 2010, 04:11:29 AM

Hello,


This message appeared when I had not installed any plugins.  I intend to use PoKeys55 plugin.
I solve this problem after I remove all components of Mach3 (Mach3 directory and drivers), after that , I reinstall Mach3 and, until now, all work fine.  

Moraru Daniel.

Title: Re: Error triggered Art code: 1
Post by: Ya-Nvr-No on April 23, 2010, 07:07:39 AM

I had read what you did to solve your problem. I too had not added any plugins, I was working on creating screen sets at the time.
Mach3 just failed to start one time, So I was explaining how I tracked down my problem. Thought it might help others. My post was not ment for you, it was just a general post to others who might see this error and freak.

Title: Re: Error triggered Art code: 1
Post by: devpao on June 30, 2010, 11:32:44 AM

I'm testing a new plugin, it works on the developement machine but on a plain xp pc it triggers " Error triggered Art code: 1" at startup.
Any hint about what is triggering this message? ???
If I remove the experimental plugin there is no error and Mach3 works fine so I'm fairly sure Mach3 is properly installed on both the machines.