Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: ftec on March 22, 2010, 08:37:24 PM
-
I have tool descriptions set up in my CAM tool library for each tool to show as a comment line in Mach. Can I somehow disable the "Press Cyclestart After Tool Change" text which I don't need to see any more :) and which hides this tool description? I haven't organized my tools by number yet and I would need to see the tool description.
thanks,
/Risto
-
hi, you have to go a Config after choice General Config, in the side right is three option for the Tool Change, choice the first that is Ignore Tool Change and save the changes.
regards.
-
So that will only disable the text and not ignore the whole tool change procedure? I mean, I need to have the machine to stop for tool change still.
-
So that will only disable the text and not ignore the whole tool change procedure? I mean, I need to have the machine to stop for tool change still.
No, you would need to set it to Auto Toolchange and write yourself a custom M6 Macro to do what you want.
Hood
-
All right, that won't be a problem. Thanks Hood!
/Risto