Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: 15mgtar on March 18, 2010, 04:21:56 AM
-
when I start mach3 the job function is running perfectly I can change between the multi and step but when I load cnc file I can no longer change between the multi and step it is always in the step mode. What is wrong with this?
-
Are you meaning on the flyout screen? You should be able to change jog with code loaded.
Hood
-
Hi thanks for the reply,
when the code is loaded i can no longer change to multi it only sits at the step on the job window
-
Are you meaning with a MPG? I think you only have the choice of continuous or Step if its keyboard jogging but with a MPG you have Velocity, Step and MultiStep options and all should be able to be changed when code is loaded.
Can you attach your xml please.
Hood
-
I can not select the continuous, it only sits at step in jog windows after I load the file
-
Please attach your xml as that is not normal.
Hood
-
here is my xml
-
Ok you have a non standard screen and I am guessing that may be the issue as I have just used your xml and changed screen so I can view. I loaded the standard 1024.set and loaded some code and I could change the Jog mode from Step to Continuous.
Hood
-
yes this only happends when I load certain file, not all file that I load do this. could it be only because of my certain file that I load into mach3?
-
Attach one of the files that cause the problem and I will see if I can find the problem.
Hood
-
ok thank you I will try to find the other file because the one I know is about 36mb nc file, I surely can not upload here.
-
here is the gcode but I edit it to keep the file small
-
Just tried your xml and your code and I can change between Step and Constant jog no problem. Try the standard screenset to see as I think that may be your problem.
Hood