Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: omegasea21 on March 12, 2010, 09:20:10 PM
-
Hello. Looking for someone to help me set up my custom machine. It is an x y gantry setup with a z drive, it is actually set up as a pick and place machine that is running mach3.
Someone familar with:
1.) Wiring Mach3
2.) Gcode
3.) modbus setup
Of course I will pay for the help. Preferably in NY, but open to other areas as well.
Thank you.