Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: jpeter on January 25, 2010, 06:18:44 PM

Title: using mdi
Post by: jpeter on January 25, 2010, 06:18:44 PM

Hey, I'm configuring an upgrade solving some glitches and found this one. When entering code into the MDI window the moment I enter the letter Z the window turns gray and blanks all previous entries. For example: Enter g1x1y1z......, the window turns gray and blank when I enter z. Strange. Any ideas?

Jim

Title: Re: using mdi
Post by: ostie01 on January 25, 2010, 06:24:52 PM

Maybe you have the letter Z associated with some hot key.

Look at the hot key page under config.

Jeff

Title: Re: using mdi
Post by: jpeter on January 25, 2010, 06:42:20 PM

thats an idea. i'll check that.

Title: Re: using mdi
Post by: jpeter on January 25, 2010, 07:02:56 PM

thats an idea. i'll check that.

Title: Re: using mdi
Post by: jpeter on January 25, 2010, 07:13:13 PM

Hey Jeff, you get a gold star. Somehow I made z a hot key. Must have been by accident.

Thanks,
Jim

Title: Re: using mdi
Post by: ostie01 on January 25, 2010, 08:05:30 PM

Was my pleasure, happy to help

Jeff