Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: dtrade on January 18, 2010, 10:02:52 PM
-
I'm new to CAD/CAM and am having a problem loading dxf files to lazycam. I create simple 3d drawings by extrusion but when I export them to lazycam they become 2d drawings which can't be used by Mach3. I've tried saving in different file formats but to no avail. Any suggestions?
-
dtrade,
LC is 2D so save the drawing as a 2D version 12 dxf for import into LC.
RICH
-
I create simple 3d drawings by extrusion
That's your problem. Create 2D drawings, and as Rich said, export as v12 .dxf
-
Thanks, that worked fine.