Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ProMach on September 21, 2006, 11:52:22 AM

Title: M5 Spindle Does Not Stop
Post by: ProMach on September 21, 2006, 11:52:22 AM

M3 amd M4 work fine. E/stop switch stops the spindle, but M5 does not stop the spindle.
Only way seems to input in program a spindle speed of 0. Then it works.
Checked with Art and the M5 macro is as standard ie not corrupted.
Any suggestions?

Title: Re: M5 Spindle Does Not Stop
Post by: Brian Barker on September 21, 2006, 07:29:26 PM

There should be  DoSpinStop() in the M5 macro. could you please check it

Thanks
Brian