Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: bsims66173 on December 31, 2009, 04:58:29 PM
-
Can some tell me how to change my table display. I would like for x to display north and south on the display and y to display east and west. Right now my x displays east and west and y is north and south. I had it working this way but something caused it to change and I can't remember how I changed it before. When jogging the machine, all movement is correct. Up and down arrow moves x north and south and left and right arrows move y east and west but the display shows opposite and when running a program x is east and west and y is north and south. Hope this makes sense and thanks for any help.
Barry
-
As far as I know you can not rotate the toolpath view as it is the standard.
You could change the keys on your keyboard to work differently if you wished by going to Config menu then System Hotkeys, in fact it sounds like you have already done that as yours are not the default. X axis should move with East and West keyboard keys and Y with North and South.
Hood