Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Greggm on December 23, 2009, 05:46:07 PM
-
I just updated my V-Carve Pro to Ver 5.504 and Ez Router told me to look on here to see if anyone has created a Post Process for the 4th Axis, I have Bob-cad on the laptop and Mach 3 on the Machine Control PC. He said they can't write a post until they build a machine with a rotary to test it on.
I also have the Automatic Tool Changer Option (4 position)
any help would be greatly appreciated
Gregg
ps New here, hope this is in the correct category.