Machsupport Forum
Mach Discussion => Mach Screens => Flash Screens => Topic started by: BobWarfield on December 05, 2009, 08:24:36 PM
-
Saw the new Tormach Flash screen. Very cool!
They have a nice video of it here: http://www.tormach.com/videos_machine.html
Cheers,
BW
www.cnccookbook.com
-
I agree they are very cool.
Can someone tell me how to edit the flash screens (.swf file) such as those that Tormach uses. I used to be able to edit the .set files as I wished to add convenient controls and labels with MachScreen editor.I would like to edit the flash screen to add some convenient things left out such as the name of the coordinate system i.e."I named the G55 user system to "Left Rear Vise corner".
-
We were supposed to get a Flash screen development manual about a year ago, but it never materialized.
-
Can this screen be used far any cnc machine or is it Tormach only?
Walt
-
When loading the Tormach flash screen , I get a blank screen on the pc (XP Prof at the machine) at the Tormach machine , while my desktop (WIN 7) loads the screen and it works well .
Can any one advise on what I need to correct the problem , I assume some sort of driver is missing at the machine PC.
-
I believe you need to install the latest flash utility
-
Had the same problem, could not get the flash screens to work after installing rev 3.12b. Finally ran the Flash UNINSTALL program (for no good reason, just out of logical things to try), and then reinstalled. That worked.