Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: pelletman on November 23, 2009, 06:45:24 PM

Title: parts and pins
Post by: pelletman on November 23, 2009, 06:45:24 PM

Hi Everyone,

I making a router table i will be using (2) motors for they X  i  am using a 4 ax hobby cnc controller. i have slave they A with the X now do i also have to set port and pin for they A ax even if its slaving off the X.

THANKS  to everyone for all there help and have a great Thanksgiving and a safe one
tom :)

Title: Re: parts and pins
Post by: Hood on November 23, 2009, 06:48:13 PM

Yes, if you have a drive for the A connected to different physical pins than X you need to enter them in Ports and Pins.
Hood