Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: ibyte2 on September 10, 2006, 10:22:18 AM

Title: Spindle E-stop
Post by: ibyte2 on September 10, 2006, 10:22:18 AM

Morning All,

Looking for a electrical circuit to add e-stop for the spindle. Using Gecko 201 controllers on a KT 2514

Thanks
 Ron

Title: Re: Spindle E-stop
Post by: Brian Barker on September 12, 2006, 10:58:54 AM

You should be able to put ina relay to set the disable pin on the G201...