Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mhasting2004 on November 12, 2009, 08:53:38 PM

Title: spindle toogle error
Post by: mhasting2004 on November 12, 2009, 08:53:38 PM

Hi Guys

Probably a bloody obvious problem but buggered if I can find it. I'm running Mach Version R3.042.032 and SS ver. 0.015 OGX .

I've rebuilt my xml from scratch and I still get a Terminating Scripts message everytime I try and start the spindle either on the main page or the diagnostics page. Mach will at first toggle the relay on then it turns it back off and reports Terminating Scripts in the status bar.

Not sure if this is a SS or Mach issue but more likely PEBKAC


Cheers

Mark

Title: Re: spindle toogle error
Post by: mhasting2004 on November 12, 2009, 09:02:41 PM

Opps should have attatched my XML

Cheers

Title: Re: spindle toogle error
Post by: mhasting2004 on November 12, 2009, 10:21:26 PM

Never mind I think we've traced it down... doing some dll debugging to get Huanyang VFD talking to Mach via USB ... Stay tuned elsewhere :)