Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: markn on November 11, 2009, 04:29:27 PM
-
Hi Guys,
Has anyone had any luck running Mach3, on a 300mhz processor?
I would like to control one axis at a time, no coordinated axis movements.
Thanks in Advance
-
probably best to use Mach2 if you are wanting to try to run on such a slow computer.
Hood
-
Just try it and see how it works. I ran for a year on a 544MHz machine with no problems. I ran my X2 for a while on a 166MHz PC, and never had a problem.
Regards,
Ray L.
-
I can run it on a 400MHZ laptop with no trouble. Just don't click on something.....slow as heck!
RICH