Machsupport Forum
Mach Discussion => Brains Development => Topic started by: Pich on November 04, 2009, 11:45:00 AM
-
I'm new at this, and I was wondering if I could accomplish this task with brain.
Load an NC file from a push button and then run it, by pressing a different push button it would close the one loaded and load a different file.
John
-
something like that would best be implemented in the macro pump
scott
-
Hi John,
Check out this thread......especially the last page.
http://www.machsupport.com/forum/index.php/topic,11469.50.html
It works pretty cool.
Might be what you need.
Russ
-
Will do
Thanks a lot guys
-
This would need modified but take a look at this post.
http://www.machsupport.com/forum/index.php/topic,10910.0.html
Bill