Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: DW on October 22, 2009, 05:38:18 PM

Title: Pro-e and G43 H# problem
Post by: DW on October 22, 2009, 05:38:18 PM

Does anyone know how to out put the g43 h# under pro manufacture.
The post works fine with only 1 tool setups and we dont want to touch off each and every tool change.
The post will out put a G43, but we cant seem to find a way to put in the H#.

thanks
DW