Machsupport Forum
Mach Discussion => Mach Screens => Works in progress => Topic started by: TDAY on October 22, 2009, 01:20:13 PM
-
Hello all,
Thought i would post my Mill set.Was going for a simple EASY on the eyes layout.Its kinda "plain jane" but works well here on our 3 axis Supermax Vertical Mill.
HTH
Troy
-
Here is more screen shots.
Troy
-
Looks Good Troy. Simple too. I like it.
Brett
-
Thanks Brett, i hope its of use to someone. :)
Troy
-
where should i place the bitmaps.imean location in mach-bitmap folder
-
Unzip the New Mill Screen Set folder and place the unzipped folder(which should be labeled New Mill Screen Set) inside of the Mach3 Bitmap folder.Let
me know if it works for you. :)
HTH
Thanks,
Troy
-
yes i did that.and loaded ur screen.
it looks complete different than what u posted.
May be the bitmaps are not linking properly
http://img63.imageshack.us/img63/7708/newbitmapimage.gif
**one more thing
Thanks for the screen..
-
??? Thats a old set i did. Maybe i loaded the wrong .set file.
Let me look....
-
Yup, wrong .set file, here is correct one.
-
yeh its better now.
Thanks for the screen.
and it will be much perfect if you could add one more screen with only jog button.
Probably big buttons.so that one can run the complete screen on touch screen.
all jog options we see when we use TAB in regular Mach3 screen.
like if you could create a separate page that will be amazing.
-
Ya, i started to do another bigger flyout, just never finished it. I might make a screen for jogging.
Thanks
Troy
-
nice.
i will wait for that..
-
Been a while :) But i finally got mill up and going again, and started to update my screenset a little.
The TAB flyout and the "Jog" area on screens. Flyout is still in progress.
HTH
Troy