Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: mason on October 22, 2009, 02:37:27 AM
-
I am using mastercam and mach3 to run my operations. But for some reason I keep getting this error message every time I load particular codes. Current point same as end point of arc on line number #.
Can anybody help me out. I have stared at this thing for hours.
John
-
John,
Could be a number of things ie; post processor, the arc Gcode used, etc.
I suggest you read the MACH3 Turn Arc Motion Tutorial which is in the Members Docs. Here is the link:
http://www.machsupport.com/forum/index.php/topic,11932.msg76353.html#msg76353
That will give you a good understanding on arc programing.
RICH