Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Kees Holland on September 04, 2006, 02:56:16 PM
-
Mach3 version D1.90.081
I want to setup in the motor tuning menu, the A axis as a slave to the X axis, but it isn't active.
Does somebody now why? i need this option for my router.
regard's Kees
-
Bij ports and pinsĀ
enable motor A axis...
groetjes !
-
Bedankt Swets voor de tip.
m.v.g Kees