Machsupport Forum
General CNC Chat => Show"N"Tell ( What you have made with your CNC machine.) => Topic started by: kolias on September 02, 2009, 06:16:53 PM
-
The attached picture was posted by a member at the router forums (Title: my CNC work) but asking questions how he did it we got no replies
I just wonder if anyone knows how a piece like that was done
Nicolas
-
That could very well have been done in Vectric's Aspire program.
But many other 3D programs could do that as well.
Dave
-
That could very well have been done in Vectric's Aspire program.
But many other 3D programs could do that as well.
Dave
I'm new to CNC so forgive me; when I will do a cut on my CNC router with the X,Y,Z axes and without a 3D program, isn't that considered a 3D cut?
Nicolas
-
Sort-of ;) but without 3D software, it's more like 2.5 Dimensional cutting.
Here's a great explanation for you:
http://www.shopbottools.com/3-d_work_v2.htm
Dave
-
Sort-of ;) but without 3D software, it's more like 2.5 Dimensional cutting.
Here's a great explanation for you:
http://www.shopbottools.com/3-d_work_v2.htm
Dave
Excellent article Dave, much appreciated
It answered my question in the best possible way
Nicolas
-
This is nice too
Many on the Artcam Forum
-
This is nice too
Many on the Artcam Forum
Indeed very nice
Went to Artcam site but could not see any price for their software. How much are they?
Nicolas
-
Look at page 2
Jeff
-
Look at page 2
Jeff
Wow Jeff, looking at these prices I would not be able to sleep tonight LOL
And when I paid $150.00m for Mach3 I thought it was expensive. I think I choose the wrong hobby to get involved with.
Well I'm jocking, I love my CNC but Artcam although I good software it is not for me but I'm sure there are other software out there that will be good for my needs. First I have to learn to do the basics with Lazycam & Mach and later we will see what other software I will need.
Thanks for the info
Nicolas
-
This one is for free, never tried it but look OK
http://www.vectorart3d.com/machinist_free/
-
Take your time. see where your interests are going and then start looking hard at the higher end software.
All this software can add up to a small fortune quickly, but, you already spent a small fortune on the machines
and you can't have the software for free!
RICH