Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: francopuk on August 30, 2006, 09:53:49 AM
-
hi to all,
i have a joystik usb, this work only 2 axis, this is normal?
thank in advance
Franco
-
I use a game pad so it has left and right pads or joysticks (depends on what you buy). Left if X-Y right is A-Z. I use the buttons for jog control and reset.
-
if is possible, send me the configuration of mach3 for gamepad
tank
franco