Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: DanB on August 20, 2009, 10:37:44 PM
-
I'm currently using CandCNC's screenset for plasma cutting and recently i needed to use the option Feedrate override and it wont work the percentage changes and the FRO number changed but the Unit/Min stayed the same and the cutting didnt go any faster..
any suggestion on how to enable it
-
Hi, Dan
What version of mach3 are you using. It's under, Help, About ?.
Chip
-
I think you probably have the "No FRO on Que" box checked in the General Configuration page.
HTH,
Sid
-
R3.042.024
the no FRO on Que was unchecked and i did try check it and it didnt change anything..
its now back unchecked...
-
Can you attach an example of the code and also your xml please.
Hood
-
here are the files.. any other files would you need?
Thanks for your help
Cheers
Dan
-
It seems to be working fine here but I am just using the standard Plasma screen as I dont have the MP1000-THC4a.set that you are using.
Just as a test load the standard sceen and see if it works.
Hood
-
okay ill give that a try then will let u all know in 15 min :)
-
i just changed the screenset and then it worked then switched it back and it still works.. pretty wierd but im happy it works now..
-
Weird but as long as it works thats the main thing :)
Hood
-
Hi, Dan
Tried your xml & G code files with ver .024 and ver .029, I did get a better result with ver .029's override, It got an increase with both ver's though.
Thing's sometimes get screwy now and then, Glad it's working now.
Chip