Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Bengt on August 16, 2009, 02:06:18 PM

Title: Turn Tooltable weird figures
Post by: Bengt on August 16, 2009, 02:06:18 PM

Hi,
wherefrom does the wierd figures come from to REF TOOL as all fields are like follows:
016122257031419763000000000000000000000000000000000000000000000000000000000000000

Cheers,
Bengt

Title: Re: Turn Tooltable weird figures
Post by: Bengt on August 16, 2009, 04:25:59 PM

No one with any ideas WHY these figures pop up in my tooltable, all work impossible and lots of weird movements of the tools.

My office PC shows 0.0000 on the REF Tool 0 in all fields but my shop PC shows these odd figures, any help would be appreciated.

Title: Re: Turn Tooltable weird figures
Post by: Hood on August 16, 2009, 06:21:25 PM

Sorry dont have an answer but a way to get it working may be to take a screenshot of your tool offset table as a reference. You could then copy over the tools3.dat from your computer thats good. You will then need to update all of the tool offsets if they are different.
Hope it works for you.
Hood

Title: Re: Turn Tooltable weird figures
Post by: Chip on August 16, 2009, 07:54:31 PM

Hi, Bengt

Re-name your Mach3Mill xml (profile) and post it.

Hears a link to someone Else's post on this, But no fix listed. http://www.machsupport.com/forum/index.php/topic,12232.0.html

Chip

Title: Re: Turn Tooltable weird figures
Post by: Bengt on August 17, 2009, 02:50:33 AM

Hood,
Done that = No Go

Chip
I see that I am not alone  >:(
Have done new reinstall of Mach3, still the same problem
My NFS wizards work OK so I assume my License is OK
Will have a go today and copy my XML

Title: Re: Turn Tooltable weird figures
Post by: Hood on August 17, 2009, 08:49:56 AM

Just looked at my lathes tooltable and it has weird numbers as well for that and it doesnt affect anything.
What problems are you having?

Hood