Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: rcduncan on August 09, 2009, 01:14:25 PM
-
I am using MACH3 turn and and I am having a problem with the G76 code. I used the Wizard to thread a .25" end of a 2.16" tube. I don't add Chamfer or taper but I get all sorts of odd paths while threading. First an chamfered cut front to back, next a straight cut then a deeper angled cut ... until it gets to depth. Then it does an reversed chamfer on the back end of the thread. Is this normal? Here is the Gcode:
G00 z2.1
G00 X1.1
M04 S400
M01
M08
G76 x1.0 z1.75 q1 P0.08333 H0.02 I29 C0.1
M9
M5
M30
Any help would be appreciated.
BOb
-
Does it do that if you just cut air?
Also if you want to attach your profiles xml file I will see if I can find a problem there.
Hood
-
Hood,
Here is the XML file. Thanks for your help. Sorry if you got multiple copies, Yahoo keeps saying the reply is already sent.
Bob