Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cut2spec on August 05, 2009, 01:41:42 PM

Title: 3D g-code need
Post by: cut2spec on August 05, 2009, 01:41:42 PM

I am looking for someone to write a 3D g-code. I have a 2D autocad drawing. I can send a picture of a finished piece. I have been looking for a 3D cad cam program all day but at this time everything I have found is over my $500.00 budget. I am only looking to do this one code for now, a simple foam carving. There is a ramp in the front about 4" long, 2" flat and a ramp on the end. It is 6" X 20" rectangle.

Title: Re: 3D g-code need
Post by: tubular2000 on August 05, 2009, 02:14:28 PM

post the pic and the drwing file i might be able to help it it is not too time consuming

Title: Re: 3D g-code need
Post by: cut2spec on August 05, 2009, 02:22:07 PM

Thank you I will get them together and post them they are on another computer

Title: Re: 3D g-code need
Post by: cut2spec on August 05, 2009, 04:24:28 PM

I solved the problem thank you for your time