Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: mma on July 30, 2009, 02:46:01 PM

Title: Gets ERROR G100 not communicating
Post by: mma on July 30, 2009, 02:46:01 PM

I installed the newer VErsion 1.0.0.1 after the previous Ver R1.84.002 crashed.. Now, while trying to run it it gives me msg " G100 not communicating"..
Error during Run Phase: Comm/Prog Error
Master Partition: inst=0 part=0 ecode=777
connection lost..

also, I cant select/deselect in G100 Monitoring under Plugin Control..

No movement of the machine at all with the arrow keys in the key board..

Pls help'

Title: Re: Gets ERROR G100 not communicating
Post by: mma on July 30, 2009, 02:47:26 PM

I installed the newer VErsion 1.0.0.1 after the previous Ver R1.84.002 crashed.. Now, while trying to run it it gives me msg " G100 not communicating"..
Error during Run Phase: Comm/Prog Error
Master Partition: inst=0 part=0 ecode=777
connection lost..

also, I cant select/deselect in G100 Monitoring under Plugin Control..

No movement of the machine at all with the arrow keys in the key board..

Pls help'

Title: Re: Gets ERROR G100 not communicating
Post by: mma on July 30, 2009, 03:14:47 PM

pls help on this!!Very urgent..

Thanks
Mohammad