Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: giannis121 on July 24, 2009, 07:52:44 AM
-
Have you noticed any problem on "run reverse" button (OEM 279) on versions 3.042.20 and over?
Or something is happening to my pc?
-
Ok, now "run reverse" works.
But only if i do the following.
I installed 042 fully with parallel port drivers.
After that i installed 043 without drivers.
If i install 043 with drivers, still "run reverse" does not run.
Anyway, if the end was good, everything was good.
THANKS