Machsupport Forum
Third party software and hardware support forums. => Newfangled Solutions Mach3 Wizards => Topic started by: vmax549 on July 18, 2009, 11:20:52 AM
-
Hiya RON , would you consider adding NPT threads to THe threadmilling wizard (;-) Please
(;-) TP
-
I wrote a simple one a while ago- I had to thread a 3" NPT into a throttle valve for a locomotive boiler I helped build. I actually cut 3 threads, on the throttle, a flange and a ball-socket coupling. They all worked, the boiler passed inspection and got stamped.
I did it as a quick and dirty, it would take some error checking and clean up to make it generally usefull.
Ill see what I can do.
-
I can probably give you and example macro that does it if you need it for a reference
(;-) TP