Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: jkardias on August 20, 2006, 11:20:19 PM

Title: Gibbs Cam
Post by: jkardias on August 20, 2006, 11:20:19 PM

Is anyone using Gibbs Cam 2005?

What post processing file are you using?
I have just about every Post file for every CNC machine I just cant find one that produce a NC file that works flowlessly on the Mach3

Any Ideas which Post files is best to use so that I can get clean .NC files

Title: Re: Gibbs Cam
Post by: Brian Barker on August 21, 2006, 07:11:22 AM

I think Gibbs is the only one that can write up a post for Mach3.. I don't know this for sure but I think that is the case... I Also think it is 500.00 for a can post.
So call your dealer and see what they can do for you :(

Sorry
Brian

Title: Re: Gibbs Cam
Post by: Will Slota on August 30, 2006, 05:26:29 PM

Mastercam has had a post processor that supports Mach 3 controlled CNC's for years.

Title: Re: Gibbs Cam
Post by: jkardias on September 05, 2006, 02:25:47 PM

Thanks, would you happen to have the MasterCam Post File, Im in the process of developing a post process file for Gibbs cam, it would make thinging easier if i had a model to follow

Title: Re: Gibbs Cam
Post by: CNC-Steuerung on October 12, 2006, 06:35:29 AM

Hi,

"Mastercam has had a post processor that supports Mach 3 controlled CNC's for years."

Im searching for a post processor for Mach3! Could anybody tell me where I find it?
Thanks a lot,

Wolfram

Title: Re: Gibbs Cam
Post by: Graham Waterworth on October 12, 2006, 05:16:48 PM

Check this topic

http://www.machsupport.com/forum/index.php?topic=1306.msg7315#msg7315

Title: Re: Gibbs Cam
Post by: jkardias on November 07, 2006, 09:39:10 PM

I finally got my Gibbs Post processor working nicely

hope you find it helpful

See atttached

Title: Re: Gibbs Cam
Post by: KAYMAT4 on September 25, 2013, 05:49:45 PM

it keeps shutting my Gibbs down any help