Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: signman on June 09, 2009, 04:42:17 PM
-
Recently purchased a used Gerber Dimension 200 router, without any software. The Mach 3 output is parallel, the Gerber needs serial input to the ARC controller. Saw a post from last year with no solution. Any help out there?
Signman in St. Cloud , fl.
-
Afraid your only option will be to find out how things are conected and then if possible rewire for the parallel port.
Hood
-
Signman, the Gerber system is proprietary so can't be easily converted.
The ARC station is a micro controller and servo driver all in one, it communicates with the Gerber software and does not accept step/direction type inputs.
Zax.