Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: bfairey on June 09, 2009, 07:49:52 AM
-
The machine stops in the middle of a program and Windose says
"program not responding"
It is suggested that I Star ground my machine.
Brian.
-
All of your shield wires should ground at a single point,I suppose its called that as it looks like a star with all the wires coming in to a central point.
Hood
-
This should also include any grounded power supply commons and also the service ground.
Also all metal sections of the machine and spindle frame should be bonded to the same point.
Usually your PC Power Supply is grounded through the M.B. screws, it pays to take the PC P.S. direct also.
Nosmo