Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Sebas on June 08, 2009, 06:06:48 PM
-
Hi,
I wanted to connect to a mach Sanyo Denki servo amplifier but no pulse / dir.
Mach can generate outputs as cw and ccw directly.
-
Afraid not, I believe the SmoothStepper can do that but have never tried it myself.
What model SanyoDenki do you have?
Hood
-
The model is SanyoDenki PE2A050AMEBP0A
-
Thought I might have had the manual for that model but afraid I dont :(
Hood