Machsupport Forum
*****VIDEOS***** => *****VIDEOS***** => Topic started by: budman68 on May 25, 2009, 08:41:40 AM
-
Thought I'd share another quick video of a pair of chuck handles I made yesterday. The originals that are supplied with the Sherline chucks are kind of "uncomfortable" for hamfisted people such as myself ;D
I set it up to take very small passes in LazyTurn so that I could just clean the profile up with some sandpaper, and then buff them out.
Very comfortable to use and your thumbs won't slide off the ends either.
Dave
http://www.youtube.com/v/4CwueR_5qFE&hl=en&fs=1&rel=0&color1=0x006699&color2=0x54abd6&border=1
(http://i63.servimg.com/u/f63/13/33/68/88/sherli10.jpg)
-
Nice job, and great looking machine.
-
Thanks for saying so, Benny- :)
Dave