Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Kently on May 24, 2009, 01:25:54 PM

Title: Step/Direction Pulse Width Default
Post by: Kently on May 24, 2009, 01:25:54 PM

In the motor tuning screen, what is the actual pulse width of the step and direction signals if you leave this screen with 0 in these two fields. I am running a SmoothStepper and a CNC4PC C23 BOB. I can spin the stepper motors, so I know the pulse witdh is not truly zero.

Title: Re: Step/Direction Pulse Width Default
Post by: Hood on May 24, 2009, 01:34:27 PM

If using the SS then the pulse width in motor tuning has no effect as it is set by the SS itself.
Hood