Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Overloaded on May 18, 2009, 07:23:22 AM

Title: "Counter" Macro not working.
Post by: Overloaded on May 18, 2009, 07:23:22 AM

Hello friends,
   This counter macro works fine if executed through the editor but does not respond to M10 in the G Code file.
Anyone know why ?
Thanks,
RC

Title: Re: "Counter" Macro not working.
Post by: Hood on May 18, 2009, 07:34:33 AM

User macros should be over 100 so that is probably your problem, try naming it M110.m1s

Hood

Title: Re: "Counter" Macro not working.
Post by: Overloaded on May 18, 2009, 07:42:40 AM

BINGO !
I found this in a search. From back in 06' so I guess things have changed a bit.

Thanks Hood,
RC