Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: JDolecki on August 11, 2006, 12:46:58 AM

Title: Adjusting screen size
Post by: JDolecki on August 11, 2006, 12:46:58 AM
I have been luckey enough to get a small industrial computer with a built in touch screen but i cannot seem to adjust the screen size to make mach3 fit on the screen what am i doing wrong?
Title: Re: Adjusting screen size
Post by: Brian Barker on August 12, 2006, 08:52:22 AM
Did you check the auto screen enlarge under the settings?
Title: Re: Adjusting screen size
Post by: Hood on August 12, 2006, 01:17:51 PM
What size is the screen? and whats its resolution? you may need to load the 800 screen if thats what your resolution is (800 x 600 ).
 Not sure how you will get on if it is a small screen as I think hitting the right buttons will be a pain. I have a 17inch touch screen (1024 x 768 resolution) and I made up my own screen with bigger buttons, made using the touch screen much better.
Hood