Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: wildgrav on April 11, 2009, 09:23:56 AM

Title: 6 AXIS control
Post by: wildgrav on April 11, 2009, 09:23:56 AM

Hi Guys

I use MACH 3 Mill and was wondering where are the other 2 AXIS. Wondering if I can make a welding robot.

Happy Easter

Noel ;D

Title: Re: 6 AXIS control
Post by: HillBilly on April 11, 2009, 09:37:30 AM

Hey Noel,

There not on the default screen set. Check the screen download section, I think there is a 6 axis screen you can download.

Happy Easter,
Darek